Configuration

Crossing Camera's supplied by Dept of Transport

VIP Bullet Camera's

Camera	Serial No.	Connectivity	Local Storage	Wifi SSID	Camera Logon Username	Modem (longevity) Logon	Location
Camera 1	7e04cbepag99eac	Telstra SIM	128GB SD Card	LONGEVITY-482849 (Password in 1Password)	admin (Password in 1password)	admin (Password in 1password)	Setup on mast at S&T
Camera 2	7C01C80PAG8F7BA	Telstra SIM	128GB SD Card	LONGEVITY-482837 (Password in 1Password)	admin (Password in 1password)	admin (Password in 1password)	Not in use currently in IT dept
Camera 3	Not in use or configured						S&T Office somewhere

Bullet Cameras are setup with Longevity LGAP100-4G modems in the cabinet they are mounted on and powered by battery and solar

Camera 1 is configured to record video on detection of movement (within a specified area), this is all setup on the IVS camera configuration page. Video is then stored on the local SDcard

To configure camera's log open the SmartPSS LIte Software, navigate to Devices, click on the link to web icon

If you need to add the camera's to the SmartPSS Software, you can add using the serial number and username and password for each camera. Creds in 1Password

Swift Enduro - Hunting Camera's

These camera's operate on the mobile network and have a sim installed

Camera	IMEI No.	Network Connectivity	Local Storage	Notes
Camera 1	861585049794868		32GB SD Card	Setup on mast at S&T
Camera 2
Camera 3

Are configured to send email with video attachment to crossing_cams@pbr.org.au on detection of motion. Due to the limitation of the outgoing SMTP server (which is the one supplied by the vendor of the cams) a maxium of 50 emails can be send per day from each camera 
All of the configuration must be done locally on the device

Data is also stored locally on the internal SD card and can be accessed directly from the card if inserted in a PC, data is overwritten when the SD card gets full..